Overview
Manuals
Signal Mapping
Integration Fit
Service Checks
Features:
- 12-Channel RTD Input Module for the documented Yokogawa STARDOM FCN.
- Max current consumption: 450 mA (5 V DC).
- Accuracy: ± 0.03 % of full scale (0 to 400 Ω).
NFAR181-S00 S2 belongs to the Yokogawa STARDOM FCN and performs the documented 12-channel rtd input module role in the Yokogawa STARDOM FCN autonomous controller. The retained technical evidence records Max current consumption: 450 mA (5 V DC); Accuracy: ± 0.03 % of full scale (0 to 400 Ω); Data refresh cycle: 1 s. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa STARDOM FCN receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The NFAR181-S00 S2 12-Channel RTD Input Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Yokogawa NFAR181-S00 S2 12-Channel RTD Input Module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Signal Mapping: NFAR181-S00 S2 performs the 12-channel rtd input module function within the Yokogawa STARDOM FCN. The retained documentation identifies max current consumption as 450 mA (5 V DC); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Integration Fit: approve NFAR181-S00 S2 only for the documented Yokogawa STARDOM FCN autonomous controller. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing NFAR181-S00 S2.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
