Overview
Manuals
Control Path
Interface Review
System Testing
Features:
- FCN Base Module for the documented Yokogawa STARDOM FCN.
- Max number of mountable I/O modules: 8.
- Number of mountable Power suply modules: 2 (*1).
NFBU200-S10 S1 belongs to the Yokogawa STARDOM FCN and performs the documented fcn base module role in the Yokogawa STARDOM FCN autonomous controller. The retained technical evidence records Max number of mountable I/O modules: 8; Number of mountable Power suply modules: 2 (*1); Mounting: DIN rail-mounted. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa STARDOM FCN receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The NFBU200-S10 S1 FCN Base Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Yokogawa NFBU200-S10 S1 FCN Base Module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Control Path: NFBU200-S10 S1 performs the fcn base module function within the Yokogawa STARDOM FCN. The retained documentation identifies max number of mountable i/o modules as 8; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Interface Review: approve NFBU200-S10 S1 only for the documented Yokogawa STARDOM FCN autonomous controller. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
System Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing NFBU200-S10 S1.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
