Overview
Manuals
Network Channel Assignment
CEX-Bus Fit
Replacement Data Transfer
Features:
- Two Modbus TCP channels with master and slave operation
- CEX-Bus mounting with hot swap and module redundancy
- RJ45 Ethernet connections at documented channel speeds
ABB identifies CI867K01 3BSE043660R1 as two-channel modbus tcp communication interface kit for ABB AC 800M controllers. The kit provides two Ethernet channels for Modbus TCP master and slave operation. It mounts on the CEX-Bus, supports hot swap and module redundancy, and uses an RJ45 connection with 10/100 Mbit/s on channel 1 and 10 Mbit/s on channel 2. The complete ordering identity is important because related units can differ in channel arrangement, termination design, interface function or supported system generation. Selection should therefore be based on the article number, nameplate and installed configuration rather than appearance alone.
Technical content is limited to ABB AC 800M controller and communication-interface outline 3BSE063691. Final suitability is confirmed against the installed unit, nameplate and system records.
The ABB CI867K01 3BSE043660R1 two-channel Modbus TCP communication interface kit is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB CI867K01 3BSE043660R1 two-channel Modbus TCP communication interface kit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Network Channel Assignment
Record whether each channel operates as master or slave and preserve the verified Ethernet addressing plan.
CEX-Bus Fit Review
Compare the controller generation, CEX-Bus position, TP867 baseplate and redundancy layout before fitting the kit.
Replacement Data Transfer
Back up the controller application and network configuration, then follow ABB diagnostics after module replacement.
