Overview
Manuals
PROFINET Master Role
Station Topology
Interface Commissioning
Features:
- PROFINET IO master function for AC 800M controller systems
- 10/100 Mbit/s RJ45 Ethernet connection through the CEX-Bus
- Hot-swap and redundancy support for qualified architectures
ABB identifies CI871AK01 3BSE092693R1 as profinet io master communication interface kit for ABB AC 800M controllers. The interface provides one 10/100 Mbit/s RJ45 channel for PROFINET IO master operation. ABB documents CEX-Bus installation, hot swap and module redundancy for qualified AC 800M configurations. The complete ordering identity is important because related units can differ in channel arrangement, termination design, interface function or supported system generation. Selection should therefore be based on the article number, nameplate and installed configuration rather than appearance alone.
Technical content is limited to ABB AC 800M controller and communication-interface outline 3BSE063691. Final suitability is confirmed against the installed unit, nameplate and system records.
The ABB CI871AK01 3BSE092693R1 PROFINET IO master communication interface kit is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB CI871AK01 3BSE092693R1 PROFINET IO master communication interface kit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
PROFINET Master Role
CI871AK01 serves as the documented PROFINET IO master interface for the confirmed AC 800M configuration.
Station Topology Review
Compare the CEX-Bus position, TP867 base, station names, device topology, IP settings and redundancy design.
Interface Commissioning
Preserve the controller project and network plan, then verify interface status and device communication after installation.
