Overview
Manuals
Host Port
INNIS01 Link
RS-232 Port
Features:
- The documented module function is Cnet-to-computer transfer, and this value must match the supplied unit.
- The documented host operation is Command-driven, and this value must match the supplied unit.
- The documented point definitions is Up to 10,000, and this value must match the supplied unit.
ABB INICT12 is a Cnet-to-Computer Transfer Module documented for the applicable Bailey Infi 90 system configuration. Its recorded specification includes module function Cnet-to-computer transfer, host operation Command-driven, point definitions Up to 10,000. Correct selection depends on the complete article identity, installed equipment, mechanical or electrical interfaces and the documented configuration rather than appearance alone. Using the exact model helps maintenance teams avoid incompatible revisions, connector arrangements and application variants.
Before installing INICT12, record the original nameplate, installed position, connected assemblies and every relevant configuration detail. Compare the supplied unit with the existing hardware and applicable ABB service documentation, isolate all affected energy sources and preserve required settings or calibration data. After installation, inspect each affected interface and complete controlled functional checks before returning the equipment to service.
The INICT12 ABB Cnet-to-Computer Transfer Module is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB INICT12 documentation and reference links.
Important Notice: Every linked document must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
INICT12 is documented for the command-driven host-interface position. The module manages up to 10,000 point definitions through an rs-232-c host connection.
Apply INICT12 only with the INICT12 arrangement with INNIS01 and NTMP01; confirm INNIS01, NTMP01, DTE/DCE selection, rack slot, host serial link and point database.
Record the installed arrangement before service, then verify host commands, Cnet data exchange, serial communication and point access after replacement.
