Overview
Manuals
Principle
Primary Industrial Applications
Features:
- 3300 XL 8 mm Proximity Probes
- 3300 XL 8 mm Proximity Transducer System
- 330103 3300 XL 8 mm Probe, M10 x 1 thread, without armor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable4 with other nonXL 3300 series 5 mm and 8 mm transducer system components5. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
The 330103-00-06-50-02-RU Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-00-06-50-02-RU 3300 XL 8 mm Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Due to its reverse-mount design, the probe can be screwed into the machine housing from the outside, allowing for gap adjustment without opening the machine.
Large Industrial Gearboxes: The 0.6-inch (15 mm) probe length is ideal for mounting on thin-walled gearboxes, preventing the longer probe body from excessively extending into the internal cavity.
Reciprocating Compressors: Commonly used for piston rod drop monitoring. The 5.0-meter (50-foot) long cable keeps the connection point away from oil contamination and high-vibration environments in the compressor cylinders.
Hydraulic Turbines: Used for monitoring shaft centerline and vibration. The 5-meter long cable facilitates connection to the junction box located outside the main turbine pit.
Oil and Gas (Russia/Eurasia): The RU suffix indicates that the product has obtained the specific certifications (EAC/GOST) required for legal installation in the Russian Federation and surrounding Customs Union countries.
