Overview
Manuals
NSv Ordering
Compact System Match
NSv Setup
Features:
- The documented unthreaded length is 0.0 in; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented total length is 1.0 meter (39 in); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented overall case length is 22.86 cm (9.0 in）; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330902-00-90-10-01-05 is a Bently Nevada 3300 NSv Proximity Probes for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Unthreaded Length: 0.0 in; Total Length: 1.0 meter (39 in). Match the full order code and hardware before replacement.
The Bently Nevada 330902-00-90-10-01-05 is a 3300 NSv proximity probe designed for reliable shaft displacement and vibration monitoring in rotating machinery applications. It features a 1/4-28 UNF threaded probe design, PPS probe tip, 1.0-meter cable, and ClickLoc connector, providing accurate eddy current measurement in space-limited and demanding industrial environments. This sensor delivers high-precision displacement monitoring with a sensitivity of 3.94 V/mm (100 mV/mil) and supports continuous machinery protection applications under extreme operating conditions ranging from -34°C to +177°C. The compact construction and armored cable design make the 330902-00-90-10-01-05 suitable for turbines, compressors, pumps, and other critical rotating equipment requiring dependable vibration analysis and condition monitoring.
The exact 330902-00-90-10-01-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330902-00-90-10-01-05 3300 NSv Proximity Probes manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330902-00-90-10-01-05. Retained facts: Unthreaded Length: 0.0 in; Total Length: 1.0 meter (39 in); Overall Case Length: 22.86 cm (9.0 in）. Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
