Overview
Manuals
Sensing Setup
Integration Fit
Service Checks
Features:
- 3300 NSv Proximity Probes for the documented Bently Nevada machinery monitoring products.
- Unthreaded Length: 0.0 in.
- Overall Case Length: 8.0 in.
330909-00-80-10-02-05 belongs to the Bently Nevada machinery monitoring products and performs the documented 3300 nsv proximity probes role in the Bently Nevada machinery monitoring system. The retained technical evidence records Unthreaded Length: 0.0 in; Overall Case Length: 8.0 in; Total Length: 1.0 meter (39 in). The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada machinery monitoring products receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 330909-00-80-10-02-05 3300 NSv Proximity Probes is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Bently Nevada 330909-00-80-10-02-05 3300 NSv Proximity Probes Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Sensing Setup: 330909-00-80-10-02-05 performs the 3300 nsv proximity probes function within the Bently Nevada machinery monitoring products. The retained documentation identifies unthreaded length as 0.0 in; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Integration Fit: approve 330909-00-80-10-02-05 only for the documented Bently Nevada machinery monitoring system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 330909-00-80-10-02-05.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
