Overview
Manuals
Measurement Role
Platform Match
Service Checks
Features:
- Velomitor Piezo-Velocity Sensor for the documented Bently Nevada Velomitor sensor system.
- Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5%.
- Temperature Sensitivity: -14% to +7.5% typical over the operating temperature range.
89410-01 belongs to the Bently Nevada Velomitor sensor system and performs the documented velomitor piezo-velocity sensor role in the Bently Nevada Velomitor sensor system. The retained technical evidence records Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ±5%; Temperature Sensitivity: -14% to +7.5% typical over the operating temperature range; Velocity Range: 1270 mm/s (50 in/s) peak. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada Velomitor sensor system receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 89410-01 Velomitor Piezo-Velocity Sensor is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Bently Nevada 89410-01 Velomitor Piezo-Velocity Sensor Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Measurement Role: 89410-01 performs the velomitor piezo-velocity sensor function within the Bently Nevada Velomitor sensor system. The retained documentation identifies sensitivity as 3.94 mV/mm/s (100 mV/in/s) ±5%; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Match: approve 89410-01 only for the documented Bently Nevada Velomitor sensor system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 89410-01.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
