Overview
Manuals
Principle
Features:
- Module of GE Fanuc series 90-30 PLC systems
- Series 90-30 CPU 374 Module
- It has an embedded user memory of 240KB with Two (2) Ethernet communication ports.
The IC693CPU374 is a GE Fanuc 90-30 series programmable logic controller (PLC) module. This module is a processor module used to run user programs, perform logic operations, and manage data exchange with the processor via an embedded communication port.
The IC693CPU374 can also be referred to as a controller. This controller integrates a microprocessor, using an embedded 586 processor with a processing speed of 133 MHz. Its typical scan rate is 0.15 milliseconds per 1K Boolean logic contact. This controller module is a single-slot design and can be installed in a 90-30 PLC rack.
The IC693CPU374 GENERAL ELECTRIC Series 90-30 CPU module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
GENERAL ELECTRIC IC693CPU374 CPU 374 Module datasheet(manual), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The IC693CPU374 has 240KB of user memory. It is equipped with two Ethernet communication ports supporting transmission rates of 10/100 Mbps and features automatic detection. These ports enable the controller to connect to Ethernet, allowing it to communicate with programming workstations such as desktop or laptop computers, human-machine interfaces (HMIs), supervisory control and data acquisition (SCADA) systems, and other processors to achieve message passing functions.
