Overview
Manuals
Principle
Features:
- Module of GE Fanuc series 90-30 PLC systems
- It connects to one of the CPU slots on a baseplate
- This CPU is of type 80386X and has a speed of 25Mz.
The GE Fanuc IC693CPU363 is a module in the GE Fanuc 90-30 series PLC system. It connects to a CPU slot on the baseboard. The CPU model is 80386X, operating at 25MHz. It allows up to seven remote or expansion baseboards to be connected. It operates on +5VDC with a current draw of 890mA. It has an internal battery for clock backup and allows for manual clock control. In ambient mode, its operating temperature can vary between 0 and 60 degrees Celsius.
The GE Fanuc IC693CPU363 module has three ports. The first port supports SNP or SNPX slaves via a power connector. The other two ports support SNP or SNPX masters and slaves, as well as RTU slaves. It is also compatible with RTU masters and CCM modules. A PCM module is required to support RTU masters. This module also provides a LAN port, supporting FIP, Profibus, GBC, GCM, and GCM+ modules, and supports multi-point connections.
The IC693CPU363-DL GENERAL ELECTRIC CPU MODULE may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
GENERAL ELECTRIC IC693CPU363-DL CPU MODULE datasheet(manual), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The GE Fanuc IC693CPU363 module has a total user memory of 240 KB, with a typical scan rate of 0.22 milliseconds per KB of logic. It has 2048 input points (%I) and 2048 output points (%Q). The CPU's discrete global memory (%G) is 1280 bits. Internal coils (%M) occupy 4096 bits, output or temporary coils (%T) occupy 256 bits, and the system status reference (%S) occupies 128 bits.
