Overview
Manuals
IOTA Map
HART Input Path
Protected Power
Features:
- Sixteen single-ended 4-20 mA high-level analog input channels.
- HART-capable execution with 16-bit conversion and a 50 ms scan.
- CC-TAIX51 nonredundant or CC-TAIX61 redundant IOTA pairing.
CC-PAIH51 is the Series C high-level analog input IOM for sixteen single-ended current channels with HART support. Honeywell specifies two-wire or self-powered transmitters and a 4-20 mA-only input range through 200 ohms. It provides 16-bit conversion, scans inputs every 50 ms, and supports HART configure and status communication plus collection from multivariable HART instruments. Differential and voltage input modes are explicitly excluded for this model.
The installed IOTA and redundancy arrangement are part of the hardware identity. CC-TAIX51 is the nonredundant IOTA and CC-TAIX61 is the redundant IOTA. Individually protected current-limiting circuits provide transmitter field-power conditioning for the documented Class I, Division 2 non-incendive arrangement without separate channel fusing. Preserve channel allocation, loop power, shielding, grounding, HART device assignments and the approved control database during replacement.
The CC-PAIH51 51410069-275 may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell CC-PAIH51 51410069-275 official technical documentation and product links.
This multi-page Honeywell technical document contains the exact model and its technical data. Apply the values to the supplied type number and verify its revision before installation.
Use CC-TAIX51 for a nonredundant installation or CC-TAIX61 for a redundant installation. The nominal 6-inch and 12-inch values apply to those IOTA assemblies, not to the CC-PAIH51 module or shipping carton. Verify keying, field terminals, redundant partner and the exact installed IOTA before replacement.
The documented execution accepts sixteen single-ended 4-20 mA current inputs through 200 ohms and supports HART configure and status functions. Do not apply differential-input or voltage-input capabilities from other Series C models. Confirm transmitter type, loop power, shielding, grounding and configured engineering range channel by channel.
Honeywell specifies individually protected current-limiting circuits for Class I, Division 2 non-incendive transmitter interfacing, with no separate channel fusing required in the documented arrangement. Confirm the hazardous-location design, cabinet power architecture and receiving-country approvals before treating this statement as an installation authorization.
