Overview
Manuals
IOTA Map
4-20 mA
Migration Plan
Features:
- Sixteen single-ended 4-20 mA high-level analog input channels.
- Non-HART AI-HL execution with 16-bit conversion and a 50 ms scan.
- CC-TAIN01 nonredundant or CC-TAIN11 redundant IOTA pairing.
CC-PAIN01 is the Series C non-HART high-level analog input IOM for sixteen single-ended current channels. Honeywell specifies two-wire or self-powered transmitters and a 4-20 mA input range through 200 ohms. It uses the AI-HL block, provides 16-bit conversion and scans inputs every 50 ms. This model is not the HART AI module and it does not accept the voltage-input selections documented for other Series C analog-input models.
The installed IOTA and redundancy arrangement are part of the hardware identity. CC-TAIN01 is the nonredundant IOTA and CC-TAIN11 is the redundant IOTA. Individually protected current-limiting circuits support non-incendive field-power interfacing without external fusing in the documented arrangement. When migrating from the earlier PAIX hardware family, Honeywell requires an offline change because the IOTAs differ; mixed redundant pairs are not possible. Preserve channel allocation, loop power, grounding and the control database during replacement.
The CC-PAIN01 51410069-176 Honeywell Non-HART High-Level Analog Input Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell CC-PAIN01 51410069-176 official technical documentation and product links.
This multi-page Honeywell technical document contains the exact model and its technical data. Apply the values to the supplied type number and verify its revision before installation.
Use CC-TAIN01 for a nonredundant installation or CC-TAIN11 for a redundant installation. The nominal 6-inch and 12-inch values apply to those IOTA assemblies, not to the CC-PAIN01 module or shipping carton. Verify keying, terminal assignments, redundant partner and the exact installed IOTA before replacement.
The documented CC-PAIN01 execution accepts sixteen single-ended 4-20 mA current inputs through 200 ohms from two-wire or self-powered transmitters. It is the non-HART AI-HL model. Do not copy voltage-input or HART capabilities from PAIX or PAIH modules; confirm loop power, grounding, shielding and the configured engineering range channel by channel.
CC-PAIN01 and earlier PAIX-family hardware use the same AI-HL configuration concept but different module and IOTA hardware. Honeywell states that migration between them is offline and mixed redundant pairs are not possible. The IOM, both redundant partners where applicable, and the IOTA arrangement must be reviewed together before a migration plan is approved.
