Overview
Manuals
IOM Pairing
Field Termination
Loop Commissioning
Features:
- Sixteen-channel differential analog-input termination arrangement.
- Nonredundant coated IOTA with a nominal nine-inch installed length.
- Pairs with CC-PAIH02 HART or CC-PAIX02 non-HART analog-input IOMs.
CC-TAID01 is the nonredundant Series C IOTA for sixteen differential analog-input channels. Honeywell's model table and function matrix associate it with CC-PAIH02 for HART-capable input service and CC-PAIX02 for non-HART input service. The IOTA provides the installed field-termination and IOM interface; it does not perform analog-to-digital conversion, establish scan rate or supply the IOM's accuracy specification. Those values come from the selected electronic module and its configured channel mode.
Honeywell identifies the coated CC-TAID01 as a nominal nine-inch IOTA. That value is an installed termination-assembly length, not a verified packed dimension. Replacement requires the same nonredundant architecture, exact terminal assignment, field-power arrangement, grounding, cable routing and compatible electronic module. Record the complete 51306733-175 marking and every conductor before removal. The redundant CC-TAID11 is a different architecture and should not be treated as an automatic physical substitute.
The CC-TAID01 51306733-175 Honeywell Series C Differential Analog Input IOTA may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell CC-TAID01 51306733-175 official technical documentation and product links.
This multi-page Honeywell technical document contains the exact model and its technical data. Apply the values to the supplied type number and verify its revision before installation.
Use CC-TAID01 only with the approved Series C analog-input electronic module and controller release. The reviewed matrix pairs it with CC-PAIH02 for HART service or CC-PAIX02 for non-HART service. Confirm the installed IOM, firmware, database and intended signal functions before ordering.
Record every channel, polarity, shield, common, field-power source and grounding point before disconnecting the IOTA. Preserve the sixteen-channel differential arrangement and approved cable routing. The nominal nine-inch value describes installed IOTA length and must not be used as a packed-carton dimension.
After replacement, inspect keying and terminal torque, then perform authorized loop checks through the paired electronic module. Verify low, mid and high signal values, engineering-unit scaling, alarms, HART communication where CC-PAIH02 is used, and channel quality before returning each loop to service.
