Overview
Manuals
Board Function
System Match
Commissioning
Features:
- TAA10 Termination Assembly for the documented Foxboro I/A Series and Foxboro Evo.
- Migration source: FBM10 field wiring.
- Discrete inputs: 8 channels, 120 VAC.
P0923RK belongs to the Foxboro I/A Series and Foxboro Evo and performs the documented taa10 termination assembly role in the Foxboro I/A Series and Foxboro Evo distributed control architecture. The retained technical evidence records Migration source: FBM10 field wiring; Discrete inputs: 8 channels, 120 VAC; Output rating: 2 A maximum per output. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Foxboro I/A Series and Foxboro Evo receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The P0923RK TAA10 Termination Assembly is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Foxboro P0923RK TAA10 Termination Assembly Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Board Function: P0923RK performs the taa10 termination assembly function within the Foxboro I/A Series and Foxboro Evo. The retained documentation identifies migration source as FBM10 field wiring; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
System Match: approve P0923RK only for the documented Foxboro I/A Series and Foxboro Evo distributed control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Commissioning: isolate the equipment, remove stored energy and inspect the receiving hardware before installing P0923RK.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
