Overview
Manuals
Cable Selection
Integration Review
Startup Checks
Features:
- Termination Cable Assembly for the documented Foxboro I/A Series and Foxboro Evo.
- Ambient Air Temperature: -40°C to +90°C.
- Power Supply: 24 V DC.
P0916VL belongs to the Foxboro I/A Series and Foxboro Evo and performs the documented termination cable assembly role in the Foxboro I/A Series and Foxboro Evo distributed control architecture. The retained technical evidence records Ambient Air Temperature: -40°C to +90°C; Power Supply: 24 V DC; Frequency response: 50/60 Hz ±10%. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Foxboro I/A Series and Foxboro Evo receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The P0916VL Termination Cable Assembly is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Foxboro P0916VL Termination Cable Assembly Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Cable Selection: P0916VL performs the termination cable assembly function within the Foxboro I/A Series and Foxboro Evo. The retained documentation identifies ambient air temperature as -40°C to +90°C; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Integration Review: approve P0916VL only for the documented Foxboro I/A Series and Foxboro Evo distributed control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing P0916VL.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
