Overview
Manuals
Supply Strategy
System Matching
Commissioning
Features:
- PSU100L Power Supply function for the documented Siemens SITOP power supply system platform.
- Operating Temperature Range: -20°C to 70°C.
- Efficiency: Up to 90%.
6EP1333-1LB00 is a Siemens psu100l power supply for the Siemens SITOP power supply system. The documented identity places it in the Siemens SITOP product family and defines its role as psu100l power supply within the installed control or monitoring architecture.
The available manufacturer-family information records operating temperature range: -20°C to 70°C; efficiency: Up to 90%; output current: 10A. Before replacement, compare the complete nameplate, receiving hardware, connector or terminal arrangement and approved project documentation; after installation, verify diagnostics and every affected signal or communication path before process release.
The 6EP1333-1LB00 PSU100L Power Supply is treated as Confirm Current OEM Lifecycle Status. Moore Automated may supply the exact item subject to stock, condition and complete identity verification.
Siemens 6EP1333-1LB00 PSU100L Power Supply Manual(Datasheets), Link
Important Notice: Use the exact-model manufacturer document when available. If no exact PDF is confirmed, rely on the verified product-family and model information linked within Moore Automated. Accessories, cables, calibration data and software are included only when stated in the quotation. All prices are shown in USD.
6EP1333-1LB00 is a Siemens psu100l power supply for the Siemens SITOP power supply system. The documented identity places it in the Siemens SITOP product family and defines its role as psu100l power supply within the installed control or monitoring architecture.
The listed parameters are limited to the documented model or product-family evidence. Do not import ratings from a similar part number; compare the exact label, slot or carrier, terminal map and connected equipment.
6EP1333-1LB00 must remain matched to the documented Siemens SITOP power supply system installation. Confirm the receiving hardware generation, connector or terminal arrangement, software or configuration dependencies and system drawings before approving the item.
Photograph labels and connections before removal and preserve the original position, keying, addressing and channel allocation.
Isolate the equipment using the approved procedure, verify all stored energy is removed and inspect the receiving hardware before fitting 6EP1333-1LB00.
After installation, restore power in the documented sequence, review diagnostics and test every affected signal, relay, network, control or protection function against the commissioning record.
