Overview
Manuals
Drive Setup
Revision Match
Startup Review
Features:
- SIMADYN D Application Module for the documented SIMADYN D.
- Rated value (DC): 5 V DC or 24 V DC.
- Current consumption, typ.: 1.5 A.
6DD1607-0AA2 belongs to the SIMADYN D and performs the documented simadyn d application module role in the Siemens SIMADYN D drive-control system. The retained technical evidence records Rated value (DC): 5 V DC or 24 V DC; Current consumption, typ.: 1.5 A; Current consumption, max.: 3 A. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the SIMADYN D receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 6DD1607-0AA2 SIMADYN D Application Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Siemens 6DD1607-0AA2 SIMADYN D Application Module Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 6DD1607-0AA2 or its identified product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Drive Setup: 6DD1607-0AA2 performs the simadyn d application module function within the SIMADYN D. The retained documentation identifies rated value (dc) as 5 V DC or 24 V DC; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Revision Match: approve 6DD1607-0AA2 only for the documented Siemens SIMADYN D drive-control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 6DD1607-0AA2.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
