Overview
Manuals
Basic Info
Ordering Information
Spare Parts Maintenance
Features:
- SIMATIC NET
- SIMATIC NET IE/PB Link PN IO gateway
- 6GK1411-5AB10 Siemens article / order number
- Device type: IE/PB Link PN IO
The Siemens 6GK1411-5AB10 is a SIMATIC NET IE/PB Link PN IO gateway between Industrial Ethernet and PROFIBUS. It serves as a PROFINET IO proxy and supports real-time communication for integrating PROFIBUS devices into an Ethernet-based automation architecture.
The gateway supports 10/100 Mbit/s Ethernet, PROFIBUS rates from 9.6 kbit/s to 12 Mbit/s, and connection of up to 64 S7, DPV0, or DPV1 slaves. Siemens also documents S7 routing, data-record routing, SIMATIC and NTP time synchronization, SNMP v1, LLDP, MRP, and support for DP/PA and DP/FF links.
Commissioning requires an engineered PROFINET device name and IP parameters, consistent PROFIBUS addresses and baud rate, compatible configuration software, and validated power redundancy. Siemens lists 6GK1411-5AB10 as a PM300 active product with firmware version V4.0.
The 6GK1411-5AB10 Siemens SIMATIC NET IE/PB Link PN IO gateway is an Active/Available from OEM Siemens product and may be supplied with model verification and support by Moore Automated Company.
Siemens 6GK1411-5AB10 SIMATIC NET IE/PB Link PN IO gateway Manuals/Datasheets/Link
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses, memory media and accessories are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Product Information:
The Siemens 6GK1411-5AB10 is a SIMATIC NET IE/PB Link PN IO gateway between Industrial Ethernet and PROFIBUS. It serves as a PROFINET IO proxy and supports real-time communication for integrating PROFIBUS devices into an Ethernet-based automation architecture.
The gateway supports 10/100 Mbit/s Ethernet, PROFIBUS rates from 9.6 kbit/s to 12 Mbit/s, and connection of up to 64 S7, DPV0, or DPV1 slaves. Siemens also documents S7 routing, data-record routing, SIMATIC and NTP time synchronization, SNMP v1, LLDP, MRP, and support for DP/PA and DP/FF links.
Commissioning requires an engineered PROFINET device name and IP parameters, consistent PROFIBUS addresses and baud rate, compatible configuration software, and validated power redundancy. Siemens lists 6GK1411-5AB10 as a PM300 active product with firmware version V4.0.
Ordering Information:
Order the complete Siemens article number 6GK1411-5AB10. Confirm the product family, hardware revision, interfaces, supply requirements and lifecycle status before purchase.
- Device type: IE/PB Link PN IO
- Function: Industrial Ethernet to PROFIBUS gateway
- PROFINET role: IO proxy with real-time communication
- Ethernet: 10/100 Mbit/s
- PROFIBUS: 9.6 kbit/s to 12 Mbit/s
- Supported slaves: Up to 64 S7/DPV0/DPV1 slaves
- Routing: S7 and data-record routing
- Time synchronization: SIMATIC and NTP
Spare Parts Maintenance:
6GK1411-5AB10 is an IE/PB Link PN IO gateway that integrates PROFIBUS devices into Industrial Ethernet/PROFINET. It supports 10/100 Mbit/s Ethernet, PROFIBUS up to 12 Mbit/s, up to 64 slaves, routing, time synchronization, MRP, SNMP, LLDP, and redundant power.
Retain the original configuration, firmware or project backup where applicable, and compare connectors, mounting, voltage class and environmental limits before replacement.
