Overview
Manuals
Interactivity & Components
Design Attributes
Features:
- Non-contact measurement system based on eddy current principle
- Voltage or current output with protection against short circuits
- Temperature compensated system, 1 m, 5 m and 10 m systems
The active part of the transducer is a coil of wire that is moulded inside the tip of the device, made of Torlon ® (polyamide-imide). The transducer body is made of stainless steel. The target material must, in all cases, be metallic. The transducer body is available with metric or imperial thread. The TQ 412 version is intended for reverse-mount applications. The TQ 402 / 412 has an integral coaxial cable, terminated with a self-locking miniature coaxial connector. Various cable lengths (integral and extension) can be ordered.
The TQ 402 and TQ 412 transducers can be matched with a single EA 402 extension cable to effectively lengthen the front-end. Optional housings, junction boxes and interconnection protectors are available for the mechanical and environmental protection of the connection between the integral and extension cables. The proximity system can be powered by associated signal processing modules (for example, VM600 cards) or a rack power supply.
The AF70982 111-412-000-012 Vibro-Meter High-precision non-contact eddy current proximity sensor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter AF70982 111-412-000-012 High-precision non-contact eddy current proximity sensor manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Tip Material: 8mm diameter Torlon (polyamide-imide) tip, molded onto the coil.
Body Material: High-strength AISI 316L stainless steel enclosure.
Signal Conditioner Compatibility: Must be used with the IQS900 or earlier IQS452 signal conditioner.
Extension Cable: Length can be extended using the EA402 extension cable.
Reverse mounting design: Designed for reverse mounting applications where space is limited and standard forward thread mounting is not feasible.
Rugged and durable materials: Utilizes an 8mm diameter polyamide-imide (Torlon) probe, directly molded onto the sensing coil and encapsulated in an AISI 316L stainless steel housing.
Hardware interoperability: Designed to transmit high-frequency eddy current bridge signals back to a matched Meggitt Vibro-Meter IQS900 or earlier IQS452 signal conditioner.
