Overview
Manuals
Mounting Geometry
Cable Protection
IQS900 Matching
Features:
- Standard-mount 8.2 mm proximity sensor for a documented 2 or 4 mm matched-chain range.
- A1-B1-C40-D2 identifies the standard M10 x 1 body and 40 mm geometry.
- E5000-F0-G0-H05 defines the supplied cable, protection and total-chain ordering codes.
TQ902-011 111-902-000-011 is a standard-mount high-temperature eddy-current proximity sensor for shaft relative vibration and gap or axial-position measurement. The complete A1-B1-C40-D2-E5000-F0-G0-H05 order string defines the environment, M10 x 1 mounting body, 40 mm geometry, integral cable, optional protection and total measurement-chain execution. Selection must also match the documented EA902 extension cable, IQS900 signal conditioner, required 2 or 4 mm range, target material and monitoring-channel scaling.
Before removal, record the installed probe gap, thread engagement, locknut position, cable routing, connector condition and every associated channel setting. Reproduce the mechanical position and matched measurement chain from the controlled machine record rather than from appearance or another TQ9x2 suffix. After installation, verify gap voltage, polarity, linear response, diagnostics, alarm settings and every affected machinery-protection path before returning the equipment to service.
The Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 standard-mount proximity sensor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 documentation and reference links.
Important Notice: Confirm the complete order code, measurement-chain components, machine installation and required document revision before replacement.
A1-B1-C40-D2 specifies the standard-environment M10 x 1 body, 40 mm body length and 2 mm unthreaded length. Confirm probe engagement, locknut position and target clearance.
E5000-F0-G0-H05 identifies the 5 m integral-cable execution without optional hose protection. Protect the cable routing and connector while preserving the documented 5 m chain.
Match TQ902 with the documented EA902 extension cable and IQS900 signal conditioner. Confirm 2 or 4 mm range, voltage or current output, total chain length and channel scaling.
