Overview
Manuals
Process Review
Holder Fit
Buffer Calibration
Features:
- HF-resistant pH sensing for documented process solutions.
- 120 mm sensor execution with 10 m cable.
- Holder, terminal and analyzer compatibility must be confirmed as one loop.
PH4F-120-10E-N is a Yokogawa HF-resistant pH sensor for process applications where a conventional glass electrode may be affected by hydrofluoric acid. The complete execution identifies the 120 mm sensor length, 10 m cable and documented terminal arrangement, and the installation must match the holder, analyzer and process conditions specified for the loop.
Confirm the full PH4F-120-10E-N code, 120 mm insertion length, 10 m cable, E terminal execution, holder, analyzer, process temperature and chemical compatibility before replacement. inspect the sensing surfaces, condition the sensor as required, perform buffer calibration and verify stable process response before service.
Official source boundary: Use the exact English manufacturer document and installed project record for compatibility decisions.
PH4F-120-10E-N technical documentation and verified Moore Automated resources.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Confirm fluoride concentration, temperature, pressure and wetted-material suitability for the application.
Match insertion length, holder geometry, cable route and E terminal connection.
Condition the sensor, calibrate with approved buffers and confirm stable response at the analyzer.
