Overview
Manuals
Mounting Accessories
Primary Applications
Primary Applications
Features:
- Power supply has a nominal supply voltage of 120V AC, 50/60 Hz
- This power supply module is used to provide power to the Flex I/O modules and adapters
- It has a maximum input current of 0.7 Amperes and able to withstand an inrush current of 40 A typical
The Allen-Bradley 1794-PS13 is a power module belonging to the PowerFlex I/O product family. This power supply features powerful surge power, sufficient to power four (4) adapters simultaneously. Its input voltage range is 85-264VAC, 47-63 Hz, and its nominal output voltage is 24VDC.
The 1794-PS13 has an output voltage range of 20.4-27.6 VDC (including noise and 5% AC ripple). It has an output current of 1.3 A, an output power of 31.2 watts, and a peak-to-peak output ripple of 1200 mV.
The 1794-PS13 Allen Bradley Flex I/O power supply module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen Bradley 1794-PS13 Flex I/O power supply module manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 1794-PS13 supports installation methods for the entire PowerFlex I/O system. It supports daisy-chaining of the power output to power supported adapters and can be used with both AC and DC modules. The power supply has a built-in indicator light that illuminates green when the output voltage is above 20.4V DC but below 28V DC; the indicator light turns off when the power supply is not powered, the output voltage exceeds 35V DC, the overvoltage protection is activated, or the output current exceeds 1.4A.
- Powering Communication Adapters: Its primary function is to provide sufficient current (1.3 A) to operate up to four adapter modules (e.g., EtherNet/IP, ControlNet, or DeviceNet adapters).
- Industrial Rack Applications: Designed for Class 2 contamination industrial environments, typically mounted on DIN rails or walls within control cabinets.
- Distributed I/O Support: Supports the "NetLinx" architecture by powering modular components that connect field devices and the main controller (PLC/DCS).
- Space-Constrained Installations: Suitable for applications where rack-mount power supplies are too bulky; its compact size allows it to be placed directly next to I/O modules.
- Powering Communication Adapters: Its primary function is to provide sufficient current (1.3 A) to operate up to four adapter modules (e.g., EtherNet/IP, ControlNet, or DeviceNet adapters).
- Industrial Rack Applications: Designed for Class 2 contamination industrial environments, typically mounted on DIN rails or walls within control cabinets.
- Distributed I/O Support: Supports the "NetLinx" architecture by powering modular components that connect field devices and the main controller (PLC/DCS).
- Space-Constrained Installations: Suitable for applications where rack-mount power supplies are too bulky; its compact size allows it to be placed directly next to I/O modules.
