Overview
Manuals
Mounting arrangements
Features:
- PanelView Plus 1000 / PanelView Plus 6 1000
- PanelView Plus Operator Terminal display module
- It features a 10.4-inch colored display screen with a viewing area of 132 x 99 millimeters (5.2 x 3.9 inches) and a resolution of 640 x 480 pixels
The Allen-Bradley 2711P-RDK10C display module is a companion display module for the PanelView Plus 1000 and PanelView Plus 6 1000 operator terminals. The 2711P-RDK10C replaces the original display module of the PanelView Plus Human Machine Interface (HMI) device. It displays the running interface of the process, allowing the operator to view the process status and perform corresponding control operations.
The display module has a 10.4-inch screen with a resolution of 640 x 480 pixels and a display area of 211 x 158 mm (8.3 x 6.2 inches). Because it does not have a touch unit, it can only be used with a keyboard-operated terminal. The contrast and brightness of the display module are adjustable and can be set through the terminal configuration environment.
The 2711P-RDK10C Allen Bradley PanelView Plus Display Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen Bradley 2711P-RDK10C PanelView Plus Display Module Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
During installation, remove the existing display module first, then insert the new 2711P-RDK10C. After the existing module is installed, the replacement module 2711P-RDK10C can be installed. The entire replacement process must be performed with the operator terminal powered off; otherwise, electric shock and module damage may occur. Furthermore, personnel responsible for installation must touch a grounded object before handling the display module and operator terminal, and operations must be performed on a properly grounded, flat surface. It is recommended that personnel responsible for replacing and installing the 2711P-RDK10C wear anti-static wrist straps.
