Overview
Manuals
Principle
Key Applications
Features:
- Bently Nevada 3300 XL 11 mm spare parts
- Pressure Transducer Systems
- 3300 XL 11 mm Proximity Transducer System
The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration and displacement measurements on fluid film bearing machines. The large 11 mm tip enables this transducer system to have a longer linear range compared to our standard 3300 XL 8 mm Transducer System.
The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200-series 11 mm and 14 mm Transducer Systems. When upgrading from the 7200-series system to the 3300 XL 11 mm system, every component must be replaced with 3300 XL 11 mm components. In addition, the monitoring system must be updated. If using a 3500 Monitoring System, an updated version of the configuration software that lists the 3300 XL 11 mm Transducer System as a compatible option is required.
The 130938-04-10-01 Bently Nevada Pressure Transducer Systems may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 130938-04-10-01 Pressure Transducer Systems INFO(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 3300 XL 11 mm probe comes in varying probe case configurations, including armored and unarmored ½-20, 5⁄8 -18, M14 X 1.5 and M16 X 1.5 probe threads. The reverse mount 3300 XL 11 mm probe comes standard with either 3⁄8-24 or M10 X 1 threads. All components of the transducer system have gold-plated brass ClickLoc connectors. ClickLoc connectors lock into place, preventing the connection from becoming loose.
1. Small Shaft Vibration: Designed to measure radial vibration of shafts with a diameter less than 51 mm (2 inches).
2. Confined Installation Spaces: Suitable for machines with limited side-view space or countersunk clearance, where larger probe signals may be distorted by interference from surrounding metal.
3. Axial (Thrust) Position: Monitors longitudinal movement of small rotors or planar targets as small as 15 mm (0.6 inches).
4. High-Speed Compressors: Commonly used in centrifugal air compressors, refrigeration compressors, and process gas compressors with high internal component density.
