Overview
Manuals
Compatibility Checks
Installation Planning
Configuration Reference
Features:
- 177230 Seismic Transmitter identity: 177230-01-02-05 belongs to the documented 177230 Seismic Transmitter family.
- Configuration: 100 mV/g sensitivity, 10.2 mV/(m/s²), two-wire loop power, 25.4 mm diameter, 66 mm height, and ordering suffix 01-02-05.
- Verification focus: Confirm all 01-02-05 suffixes, output range, mounting thread/connector, and approval option before replacement.
Bently Nevada 177230-01-02-05 is loop-powered seismic vibration transmitter designed for PLC, DCS and SCADA machinery-vibration monitoring loops. According to the manufacturer documentation, it converts case vibration into an industry-standard 4...20 mA signal for direct connection to plant control systems. The ordering code identifies all 01-02-05 suffixes, output range, mounting thread/connector, and approval option, so the complete nameplate information should be reviewed whenever the item is being selected for a maintenance replacement, a system extension, or a spare-parts holding.
The technical content for 177230-01-02-05 is limited to the manufacturer product page and the cited official datasheet or manual. Final compatibility depends on the expected vibration range, loop supply, monitoring input, mounting orientation, and machine case location.
The Bently Nevada 177230-01-02-05 loop-powered seismic vibration transmitter is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 177230-01-02-05 loop-powered seismic vibration transmitter manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compatibility Checks
Confirm the expected vibration range, loop supply, monitoring input, mounting orientation, and machine case location. The complete 177230-01-02-05 marking and nameplate data should be compared with the installed item before a purchase order is released.
Installation Planning
Follow the manufacturer instructions and verify mounting surface preparation, torque, cable shield, loop polarity, and hazardous-area requirements. Accessories, connectors, cables, sockets, or terminal blocks must be ordered separately unless the quotation lists them.
Configuration Reference
100 mV/g sensitivity, 10.2 mV/(m/s²), two-wire loop power, 25.4 mm diameter, 66 mm height, and ordering suffix 01-02-05. Use the official ordering information to confirm every suffix, revision, and option that applies to the required unit.
