Overview
Manuals
Temperature Option
ETR System Match
Hot-Service Setup
Features:
- The documented probe case type is ½-20 Thread - Straight Exit; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented total length is 9.0 metres (29.5 feet); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented armor configuration is High Temperature FluidLoc Cable; preserve this construction together with the complete order code and cable-routing requirements.
330876-01-90-00-05 is a Bently Nevada 3300 XL 50 mm extended-range proximity probe for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Probe Case Type: ½-20 Thread - Straight Exit; Total Length: 9.0 metres (29.5 feet). Match the full order code and hardware before replacement.
This model features rigorous technical specifications: the base model "330876" belongs to the 50mm probe series; the first suffix "-01" denotes a 1/2-20 UNF straight-exit threaded case configuration; "-90" specifies an integrated 9.0-meter (29.5-foot) cable that connects directly to the proximitor across complex spaces, simplifying the signal path; "-00" indicates a standard, unarmored FluidLoc high-temperature, high-density, fluid-impervious cable jacket, featuring a front-end design that utilizes multiple seals and a Viton O-ring to withstand differential pressure, ensuring exceptional impedance stability and hermetic integrity during long-term operation in extreme heat (-35°C to +200°C, with short-term peaks up to +250°C) and humid, steam-laden environments; and the final suffix "-05" signifies compliance with multiple high-level explosion-proof safety certifications for hazardous areas, including CSA, ATEX, and IECEx.
The exact 330876-01-90-00-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330876-01-90-00-05 3300 XL 50 mm extended-range proximity probe manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330876-01-90-00-05. Retained facts: Probe Case Type: ½-20 Thread - Straight Exit; Total Length: 9.0 metres (29.5 feet); Armor: High Temperature FluidLoc Cable. Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
