Overview
Manuals
NSv Ordering
Compact System Match
NSv Setup
Features:
- The documented unthreaded length is 0.5 in; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented overall case length is 6.5 inches; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented total length is 0.5 meter (20 in); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330901-05-65-05-11-05 is a Bently Nevada 3300 NSv Proximity Probes for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Unthreaded Length: 0.5 in; Overall Case Length: 6.5 inches. Match the full order code and hardware before replacement.
The 330901-05-65-05-11-05 is the Bently Nevada 3300 XL NSv narrow-edge confined eddy current displacement sensor probe. It features a 1/4-28 UNF thread and no metal armor (as indicated by the prefix 330901). This probe is designed for accurate, non-contact shaft vibration and displacement measurements in confined spaces, with small shaft diameters (less than 51 mm), or in environments with severe reverse and lateral magnetic field interference. Its hardware specifications include: a 0.5-inch (-05) threadless length, an increased overall housing length of 6.5 inches (-65) to accommodate deeper mounting openings, a 0.5-meter (-05) total cable length, and an integrated ClickLoc gold-plated miniature coaxial connector (-11) with a FluidLoc leak-proof seal. Furthermore, it supports ATEX/IECEx/HazLoc and other compatible standards. It has obtained multiple international explosion-proof and safety certifications (-05).
The exact 330901-05-65-05-11-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330901-05-65-05-11-05 3300 NSv Proximity Probes manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330901-05-65-05-11-05. Retained facts: Unthreaded Length: 0.5 in; Overall Case Length: 6.5 inches; Total Length: 0.5 meter (20 in). Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
