Overview
Manuals
NSv Ordering
Compact System Match
NSv Setup
Features:
- The documented unthreaded length is 0.4 in; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented overall case length is 4.8 in; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented total length is 1.0 meter (39 in); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330902-04-48-10-02-00 is a Bently Nevada 3300 NSv Proximity Probes for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Unthreaded Length: 0.4 in; Overall Case Length: 4.8 in. Match the full order code and hardware before replacement.
The Bentley Nevada 330902-04-48-10-02-00 is an eddy current displacement sensor probe belonging to the 3300 XL NSv narrow gap series. It is designed for monitoring rotating machinery with limited installation space or measuring small targets. This model features a 1/4-28 UNF threaded interface with built-in armor protection, a 0.4-inch unthreaded section length, a total housing length of 4.8 inches, a 1.0-meter cable length, and comes with an unprotected ClickLoc miniature coaxial connector. It requires no explosion-proof safety certification. When used with an NSv preamplifier, the sensor provides stable static (position) and dynamic (vibration) measurement signals, with a nominal sensitivity typically of 7.87 V/mm (200 mV/mil).
The exact 330902-04-48-10-02-00 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330902-04-48-10-02-00 3300 NSv Proximity Probes manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330902-04-48-10-02-00. Retained facts: Unthreaded Length: 0.4 in; Overall Case Length: 4.8 in; Total Length: 1.0 meter (39 in). Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
