Overview
Manuals
General Information
Ordering Information
System Boundaries
Features:
- Standard Armored Interconnect Cable
- 330505 Low Frequency Velocity Sensor
- Bently Nevada Machinery Condition Monitoring
The Bently Nevada 330505 Low Frequency Velocity Sensor is specifically designed for hydroelectric turbines where slow rotating speeds require detecting a low signal to noise ratio. It detects vibration of the stator core, stator frame, and bearing housing supports. It is designed to provide early warning of pending machinery problems and to help you diagnose problems before they become serious.
The sensor measures absolute vibration within the 0.5Hz to 1.0kHz range. Its two-wire design uses moving-coil technology and embedded signal conditioning circuitry to provide a voltage output directly proportional to the vibration velocity. Stator core and stator frame vibration can cause fretting and damage to the winding insulation. To detect these problems before serious damage occurs, mount a 330505 sensor on the outer diameter of the stator core and frame.
The 84661-22 Bently Nevada Standard Armored Interconnect Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 84661-22 Standard Armored Interconnect Cable Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 84661-22
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 330505 Low Frequency Velocity Sensor
Interconnection Cables
Standard Cable Lengths
Minimum length 3 ft (0.91 m);
maximum length 96 ft (29 m).
Feet Meters (approximate)
6 ft 1.8 m
8 ft 2.4 m
10 ft 3.0 m
12 ft 3.6 m
15 ft 4.5 m
17 ft 5.0 m
20 ft 6.0 m
25 ft 7.6 m
30 ft 9.0 m
33 ft 10.0 m
50 ft 15.2 m
99 ft 30.0 m
Maximum transmission distance: Although this component is 22 feet (approximately 6.7 meters) long, the total permissible cable length for connection to the protection monitor is 305 meters (1000 feet). Beyond this length, signal attenuation will become an issue.
Compatibility limitations: This cable is designed for the Velomitor series (such as the 330500 or 330505 series) and is completely incompatible with older Bently Nevada 21128 speed sensor housings.
