Overview
Manuals
Channel Setup
Revision Match
Service Checks
Features:
- 4 fold analog input module for the documented HIMA Planar F / H41-H51.
- Input voltage: 0...1.06 V (appr. 6 % overflow).
- Waite after test: 100 ms.
F6214 belongs to the HIMA Planar F / H41-H51 and performs the documented 4 fold analog input module role in the HIMA safety automation system. The retained technical evidence records Input voltage: 0...1.06 V (appr. 6 % overflow); Waite after test: 100 ms; Transmitter supply: 25 V ... 20 V, 0 ... 22 mA. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the HIMA Planar F / H41-H51 receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The F6214 4 fold analog input module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
HIMA F6214 4 fold analog input module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Channel Setup: F6214 performs the 4 fold analog input module function within the HIMA Planar F / H41-H51. The retained documentation identifies input voltage as 0...1.06 V (appr. 6 % overflow); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Revision Match: approve F6214 only for the documented HIMA safety automation system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing F6214.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
