Overview
Manuals
Execution Role
Module Matching
Return Service
Features:
- Control Processor Module for the documented Foxboro I/A Series and Foxboro Evo.
- Input Voltage: AC 100 ~ 240 V.
- Power Consumption: DC 19 V ~ 80 W.
CP60 P0961FR belongs to the Foxboro I/A Series and Foxboro Evo and performs the documented control processor module role in the Foxboro I/A Series and Foxboro Evo distributed control architecture. The retained technical evidence records Input Voltage: AC 100 ~ 240 V; Power Consumption: DC 19 V ~ 80 W; Processor Performance: 1.2 GHz processor. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Foxboro I/A Series and Foxboro Evo receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The CP60 P0961FR Control Processor Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Foxboro CP60 P0961FR Control Processor Module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Execution Role: CP60 P0961FR performs the control processor module function within the Foxboro I/A Series and Foxboro Evo. The retained documentation identifies input voltage as AC 100 ~ 240 V; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Module Matching: approve CP60 P0961FR only for the documented Foxboro I/A Series and Foxboro Evo distributed control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Return Service: isolate the equipment, remove stored energy and inspect the receiving hardware before installing CP60 P0961FR.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
