Overview
Manuals
Data Path
Revision Match
Installation Review
Features:
- Network Communication Module for the documented Triconex fault-tolerant safety systems.
- Ethernet (802.3) ports: 2, BNC connectors, RG58 50-ohm thin cable.
- External Transceiver Ports: 2, 15-pin D-connectors.
4329G belongs to the Triconex fault-tolerant safety systems and performs the documented network communication module role in the Triconex Tricon and Trident safety architecture. The retained technical evidence records Ethernet (802.3) ports: 2, BNC connectors, RG58 50-ohm thin cable; External Transceiver Ports: 2, 15-pin D-connectors; Serial port: 1, RS-232 compatible. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Triconex fault-tolerant safety systems receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 4329G Network Communication Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Triconex 4329G Network Communication Module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Data Path: 4329G performs the network communication module function within the Triconex fault-tolerant safety systems. The retained documentation identifies ethernet (802.3) ports as 2, BNC connectors, RG58 50-ohm thin cable; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Revision Match: approve 4329G only for the documented Triconex Tricon and Trident safety architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Installation Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 4329G.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
