Overview
Manuals
Basic Info
Ordering Information
Spare Parts Maintenance
Features:
- SIMATIC NET
- SIMATIC NET CP 5614 A3 communications processor
- 6GK1561-4AA02 Siemens article / order number
- Processor: CP 5614 A3
The Siemens 6GK1561-4AA02 is the SIMATIC NET CP 5614 A3 communications processor, a 32-bit PCI card that connects PC-based systems to PROFIBUS. It provides separate master and device functionality for automation, engineering, and data-exchange applications.
The card supports PCI operation at 3.3/5 V and 33/66 MHz, two nine-pin Sub-D RS485 PROFIBUS interfaces, and transfer rates from 9.6 kbit/s to 12 Mbit/s. Siemens supplies the configuration tool and DP-Base software and documents PG and FDL protocol support.
Installation requires a compatible PCI slot, supported SIMATIC NET software and operating system, correct PROFIBUS termination, station addressing, and bus parameters. Siemens currently lists the CP 5614 A3 as a PM300 active product; verify the runtime license and driver level before moving the card between PCs.
The 6GK1561-4AA02 Siemens SIMATIC NET CP 5614 A3 communications processor is an Active/Available from OEM Siemens product and may be supplied with model verification and support by Moore Automated Company.
Siemens 6GK1561-4AA02 SIMATIC NET CP 5614 A3 communications processor Manuals/Datasheets/Link
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses, memory media and accessories are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Product Information:
The Siemens 6GK1561-4AA02 is the SIMATIC NET CP 5614 A3 communications processor, a 32-bit PCI card that connects PC-based systems to PROFIBUS. It provides separate master and device functionality for automation, engineering, and data-exchange applications.
The card supports PCI operation at 3.3/5 V and 33/66 MHz, two nine-pin Sub-D RS485 PROFIBUS interfaces, and transfer rates from 9.6 kbit/s to 12 Mbit/s. Siemens supplies the configuration tool and DP-Base software and documents PG and FDL protocol support.
Installation requires a compatible PCI slot, supported SIMATIC NET software and operating system, correct PROFIBUS termination, station addressing, and bus parameters. Siemens currently lists the CP 5614 A3 as a PM300 active product; verify the runtime license and driver level before moving the card between PCs.
Ordering Information:
Order the complete Siemens article number 6GK1561-4AA02. Confirm the product family, hardware revision, interfaces, supply requirements and lifecycle status before purchase.
- Processor: CP 5614 A3
- Host interface: PCI 32-bit; 3.3/5 V; 33/66 MHz
- Network: PROFIBUS
- Roles: PROFIBUS master and device
- Transfer rate: 9.6 kbit/s to 12 Mbit/s
- Interfaces: Two 9-pin Sub-D RS485 ports
- Software: Configuration tool and DP-Base software
- Protocols: PG and FDL
Spare Parts Maintenance:
6GK1561-4AA02 is a CP 5614 A3 PCI communications processor with separate PROFIBUS master and device interfaces, two RS485 Sub-D ports, and 9.6 kbit/s to 12 Mbit/s operation. Match the PCI slot, SIMATIC NET software, runtime license, driver, PROFIBUS address, cabling, and termination.
Retain the original configuration, firmware or project backup where applicable, and compare connectors, mounting, voltage class and environmental limits before replacement.
