Overview
Manuals
Input Processing
Interface Match
Loop Testing
Features:
- Digital I/O Terminal Base for the documented Yokogawa STARDOM FCN.
- Voltage Rating: 300V.
- Current Rating: 10A.
NFTB5S-00 belongs to the Yokogawa STARDOM FCN and performs the documented digital i/o terminal base role in the Yokogawa STARDOM FCN autonomous controller. The retained technical evidence records Voltage Rating: 300V; Current Rating: 10A; Wire Range: 14 to 24 AWG. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa STARDOM FCN receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The NFTB5S-00 Digital I/O Terminal Base is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Yokogawa NFTB5S-00 Digital I/O Terminal Base Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Input Processing: NFTB5S-00 performs the digital i/o terminal base function within the Yokogawa STARDOM FCN. The retained documentation identifies voltage rating as 300V; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Interface Match: approve NFTB5S-00 only for the documented Yokogawa STARDOM FCN autonomous controller. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Loop Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing NFTB5S-00.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
