Get Repair Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
Bachmann AIO216
Bachmann AIO216
· Product image is representative; revision or series may vary. Contact us to request a specific version.

AIO216

Universal Analog Input/Output Module
In Stock
Ships by Tuesday, June 23
Fast Shipping Available

Product Information:

The Bachmann AIO216 (Manufacturer Part Number: 00020627-00) is a high-density, general-purpose analog input/output module. Designed specifically for the Bachmann M1 automation system architecture, it primarily serves wind power, marine, and heavy industrial process environments.

The AIO216's main advantage lies in its versatility; each channel can be independently assigned to an input or output task, significantly reducing the variety of hardware spare parts required in the field. Bachmann Electronics Ltd.

Expand All
Collapse all

Technical specifications for AIO216

  • Manufacturer:
    Bachmann
  • Product Category:
    General Automation
  • Spare Part Number:
    00020627-00
  • Estimated shipping dimensions:
    5.3x5.8x11.8cm
  • Weight:
    0.22 kg
  • Tariff Code:
    8537101190
  • Country of origin:
    Austria
  • Place of shipment:
    Xiamen, Fujian, China
  • Number of channels:
    16 channels
  • Digital resolution:
    16-bit
  • Measuring range:
    ±105 % of nominal range
  • Allowed common mode voltage:
    Max. ±1 V
  • Refresh cycle time:
    100 µs
  • Cut-off frequency:
    4 kHz to 0.5 Hz adjustable channel by channel
  • Filtering slope:
    >80 dB/decade
  • Input voltage:
    ±10 V, ±1 V, ±100 mV, ±10 mV
  • Input current:
    ±20 mA or 0 to 20 mA or 4 to 20 mA
  • Input impedance:
    Max. 300 Ohm
  • Shunt short-circuit proof:
    Up to +24 V
  • Interference voltage strength:
    +24 V
  • Input impedance:
    >100 kOhm
  • Temperature range:
    -100 to +800 °C
  • Stock:
    5

Alternative Names

A1O216 AIO2I6 AI0216 A102I6 AIO208 A1O208 AI0208 AIO2O8 A102O8 AIO288 AIO288-1 00020627-00 AIO216 00020627-00 AIO216 CC 00020631-00 AIO216 CC 00020631-00 KS-AIO216 B+C KS-AIO208 B+C

Information

Overview Manuals Temperature inputs TE Environmental Variant Options

Features:

  • Analog inputs and outputs
  • Filter adjustable from 4 kHz to 0.5 Hz per channel
  • All outputs overload, short circuit and external voltage-proof
The AIO216 modules enable the measuring or output of all standard analog signals. The AIO216 16 channels compactly in a single module. The standard signal types for current (0 to 20 mA and 4 to 20 mA) and voltage ranges (±10 V to ±10 mV) allow the connection of a wide range of sensors and actuators. A minimum 14-bit resolution makes it possible to also measure signals that do not fully utilize the measuring range (e.g. 0 to 5 V) with a sufficiently high resolution. Temperatures are playing an important role in an increasing number of processes. These modules therefore also support Pt100/Pt1000 in 2, 3 and 4-wire measuring circuits, as well as all standard thermocouples.

For each channel, a second channel with unused signal types can be used in addition to the primary configured signal type. For example, a current output can be assigned to a voltage input so that up to twice the number of channels per module are provided.

The AIO216 Bachmann Universal Analog Input/Output Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bachmann AIO216 Universal Analog Input/Output Module MANUAL(Datasheets), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Temperature elements: Types J, K, T, N, E, R, S, B can be selected
Temperature ranges per type:
Types J: -100 to +1200 °C
Types K: -100 to +1370 °C
Types T: -100 to +400 °C
Types N: -100 to +1300 °C
Types E: -100 to +1000 °C
Types R: -50 to +1768 °C
Types S: -50 to +1768 °C
Types B: +600 to +1820 °C
This equipment is available in two configurations: Standard and Ruggedized.
AIO216: Standard configuration, operating temperature range -25°C to +60°C.
AIO216 CC: Special low-temperature climate type, with anti-condensation coating, capable of operating in extreme low-temperature environments down to -40°C.

Technical notes

The Bachmann AIO216 is a high-density, general-purpose analog input/output module designed specifically for M1 control systems. Its key features include a high-standard Austrian industrial architecture, compactly integrating 16 highly configurable physical channels on a single circuit board. Each channel supports independently defined analog voltage (±10 V to ±10 mV), current (0/4-20 mA), RTD (Pt100/Pt1000 2/3/4-wire), and thermocouple temperature signals.

Ask our team:

  • How does the AIO216 optimize high-resolution analog signal acquisition and output to meet the needs of critical industrial process control applications?
    The AIO216 is designed to provide accurate analog signal processing for reliable monitoring of industrial processes.
  • What performance advantages does the AIO216 offer through its high-precision analog conversion architecture and industrial-grade signal processing capabilities?
    The AIO216 improves process accuracy by ensuring consistent signal acquisition, conversion, and transmission across automation networks.
  • Why is the AIO216 particularly suitable for applications requiring precise analog input measurement, stable analog output control, and continuous process regulation?
    The AIO216 supports high-performance control strategies by providing precise analog data acquisition and output capabilities.
  • What key technical parameters of the AIO216 should engineers evaluate, including channel density, signal resolution, input range, output range, and conversion accuracy?
    Engineers should verify the compatibility of the AIO216 with field instruments, signal specifications, control requirements, and environmental conditions when deploying it.
  • Why is the AIO216 frequently chosen for distributed control systems requiring precise acquisition of process variables and high-precision analog outputs?
    The AIO216 provides reliable analog interface functionality, supporting advanced process automation applications.
Quantity
Upload
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Moore automated please read our privacy policy.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.