Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel
      Bently Nevada 200150-09-CN
      Bently Nevada 200150-09-CN

      • ISO 9001:2015 Certified

        Our quality management system covers sourcing,testing and dispatch

      • View Our Success Stories

        Real stories from real customer orders
      In Stock
      Ships by Monday, September 7
      Fast Shipping Available
      General-purpose accelerometer

      200150-09-CN

      Product Information:

      A hermetically sealed 316L stainless-steel accelerometer with 100 mV/g sensitivity, ±25 g range and 10 to 1000 Hz response. Mounting option 09 supplies a 3/8-24 to 3/4 NPT 1.25 in hex stud, and CN is the manufacturer country-specific approval option.

      Product image is representative; revision or series may vary. Contact us to request a specific version.
      Get a Quote
      • One-year warranty
      • Global shipping
      • Exact-model verification
      WhatsApp: +86 180 2077 6792 Email parts team
      01


      Model Verified

      Model, revision and nameplate reviewed
      02


      Email confirmation

      You will get an email confirming that we have received your enquiry
      03


      Dedicated Account Manager

      One of our team will be in touch to confirm your part(s) specification and condition
      04


      Your quote

      You will receive a comprehensive quote tailored to your specific needs
        • PRODUCT OVERVIEW

          What is this product?

          Bently Nevada 200150-09-CN is a general-purpose piezoelectric accelerometer for Trendmaster 2000 and Trendmaster Pro interfaces. It provides nominal 100 mV/g sensitivity, a ±25 g measurement range and a 10 to 1000 Hz ±10% response. The 316L stainless-steel housing is hermetically sealed and uses a five-pin top connector. Mounting option 09 supplies a 3/8-24 to 3/4 NPT 1.25 in hex stud. The CN suffix is a manufacturer country-specific approval option; it is not merely decorative text and must be retained and matched to the destination and accompanying documentation. Correct selection requires the mounting adapter, connector, ProTIM interface, cable, frequency range and approval record to be verified together.

          Source boundary

          Manufacturer reference: official product datasheet and ordering information for 200150 General Purpose Accelerometer.
        • APPLICATIONS

          Where it may be used

          Use this exact accelerometer where the 100 mV/g interface, option-09 pipe-thread adapter and CN approval record suit the Trendmaster measurement point.

          General casing acceleration

          Measures machine-housing acceleration across the documented 10-to-1000 Hz operating band.

          Trendmaster Pro input

          Connects to the specified ProTIM arrangement for periodic or continuous condition trending.

          Pipe-thread mounting point

          Uses the option-09 3/4 NPT hex adapter where that machine interface has been prepared.

          CN approval replacement

          Retains the country-specific suffix and associated documents for an exact approved-item renewal.
      Technical specifications for

      200150-09-CN

      0 TECHNICAL PARAMETERS
      • Manufacturer:
        Bently Nevada
      • Product Category:
        Sensor
      • Product family:
        200150 General Purpose Accelerometer
      • Sensitivity:
        10.2 mV/(m/s²), equivalent to 100 mV/g
      • Measurement range:
        ±245 m/s² (±25 g)
      • Frequency response:
        10 to 1000 Hz ±10%
      • Mounted resonant frequency:
        >20 kHz
      • Amplitude linearity:
        ±2% to 10 g peak
      • Excitation voltage:
        4.7 to 6.5 VDC
      • Output bias voltage:
        2.5 VDC ±0.23 V
      • Mounting option 09:
        3/8-24 to 3/4 NPT, 1.25 in hex stud
      • Approval option CN:
        Country-specific approval; confirm destination documentation
      • Electrical connector:
        5-pin 1/2-20 top connector
      • Mounting hole:
        3/8-24 female
      • Operating temperature:
        -40 to +105 °C
      • Housing material:
        316L stainless steel
      • Sealing:
        Hermetic
      • Stock:
        36
      Ask for Quote
      WHAT HAPPENS NEXT?

      From enquiry to delivery

      Six clear steps show what information is required and what the written quotation will contain.
      • 01

        Find the product

        Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
      • 02

        Provide the details

        Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
      • 03

        Review the quotation

        Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
      • 04

        Confirm the order

        Accept the quotation in writing and complete the required payment before shipment.
      • 05

        Pay by bank transfer

        Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
      • 06

        Verify and dispatch

        The part is inspected, tested and securely packed before dispatch, with tracking provided after release.
      Request a Verified Quote
      BUYER INFORMATION

      Product condition level information

      Commercial details are confirmed in writing before payment.
      • 01

        Factory Sealed

        Unused product with the original factory seal intact; packaging age or storage marks may still be present.

        view
      • 02

        Original Pack

        Unused product in original manufacturer packaging that was not originally factory sealed.

        view
      • 03

        Factory New

        New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

        view

      Alternative Names

      200150 09 CN 200150-09-CN General-purpose accelerometer 200150 General Purpose Accelerometer 200150-09-CN 200150-09-CN complete order code

      Information

      Overview Manuals CN Approval Record Mounting Adapter Signal & Interface

      Features:

      • The hermetic 316L accelerometer provides nominal 100 mV/g sensitivity, ±25 g range and 10-to-1000 Hz response.
      • Mounting option 09 combines the 3/8-24 sensor interface with a 3/4 NPT 1.25 in hex adapter.
      • Suffix CN identifies a country-specific manufacturer approval option that must remain part of the product and document identity.
      Bently Nevada 200150-09-CN is a general-purpose piezoelectric accelerometer for Trendmaster 2000 and Trendmaster Pro interfaces. It provides nominal 100 mV/g sensitivity, a ±25 g measurement range and a 10 to 1000 Hz ±10% response. The 316L stainless-steel housing is hermetically sealed and uses a five-pin top connector. Mounting option 09 supplies a 3/8-24 to 3/4 NPT 1.25 in hex stud. The CN suffix is a manufacturer country-specific approval option; it is not merely decorative text and must be retained and matched to the destination and accompanying documentation. Correct selection requires the mounting adapter, connector, ProTIM interface, cable, frequency range and approval record to be verified together.

      Manufacturer reference: official 200150 General Purpose Accelerometer documentation.

      Moore Automated supports exact-item verification and spare-part enquiries for 200150-09-CN.
      Bently Nevada 200150-09-CN General-purpose accelerometer manual (Datasheet), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

      Keep the CN suffix with the full part number and confirm the destination-specific manufacturer approval documents before shipment.

      Verify the option-09 3/8-24 to 3/4 NPT hex stud, prepared surface and sensitive-axis alignment.

      Match the five-pin cable and ProTIM input to the nominal 100 mV/g signal, bias voltage and required frequency band.

      Technical notes

      Mount 200150-09-CN on a clean rigid surface using the documented option-09 adapter and avoid impacts that can overload the piezoelectric element. Verify the five-pin connector, matching interface cable and Trendmaster ProTIM channel before connection. Configure the channel for 100 mV/g sensitivity and the required frequency band. The CN suffix represents a country-specific approval option; request the exact applicable manufacturer approval record for the destination rather than treating CN as a general electrical specification.

      Accelerometer & CN Check

      I will verify 200150-09-CN on the label, including adapter option 09 and the CN country-specific approval marking. I will also provide the connector, cable, ProTIM interface and destination information for confirmation.

      My Acceleration-Point Data

      For my quotation I will provide quantity, full 200150-09-CN code, nameplate and connector photos, mounting port, connected interface, receiving country and required delivery date.

      Customs & Shipping Data

      • Product dimensions
        Documented item dimensions
        4.57 x 1.75 x 1.75 cm
      • Product weight
        Documented net weight
        Approx. 0.058 kg
      • HS / customs code
        Indicative HS code 9031809090
        Final destination-specific classification requires customs confirmation.
      • Country of origin
        USA (verify the supplied-item marking)
        Confirm the actual item marking and available manufacturer documentation.
      • Ships from
        Xiamen, Fujian, China
        Dispatch location is confirmed in the written quotation.
      • Customs documents
        Confirmed for the destination
        Available document scope is agreed before shipment.
      PRODUCT & ORDER FAQS

      Questions buyers ask about 200150-09-CN

      • What does CN mean on my 200150-09-CN accelerometer?

        CN is the manufacturer country-specific approval option. Keep it in the full part number and confirm the applicable approval documents for the destination.

      • Can I connect this accelerometer to my existing Trendmaster interface for 200150-09-CN?

        Confirm that the ProTIM and cable support the 200150 five-pin connector, nominal 100 mV/g sensitivity and required channel configuration.

      • Am I buying this 200150-09-CN from an authorized brand agent?

        Moore Automated is an independent supplier rather than an authorized manufacturer agent. The quotation is for the same exact manufacturer item identified by its complete part number, with independent verification, competitive pricing and a one-year warranty.

      • What vibration band can I measure with my 200150 for 200150-09-CN?

        The manufacturer documents a 10 to 1000 Hz ±10% frequency response and a ±25 g measurement range for the 200150.

      • How should I install the option-09 mounting hardware for 200150-09-CN?

        Use the supplied 3/8-24 to 3/4 NPT 1.25 in hex stud on the prepared port, tighten by the approved procedure and keep the sensor axis aligned.

      • What output should I check during commissioning for 200150-09-CN?

        Expect nominal 100 mV/g sensitivity with about 2.5 VDC output bias under the documented excitation arrangement.

      • Can I receive a discount if I am ready to buy this 200150-09-CN?

        Yes. Send the required quantity and confirm that you are ready to purchase. Moore Automated will check the available stock position and apply for a special discount where possible.

      • How can I confirm stock includes the CN suffix and option 09 for 200150-09-CN?

        Request a full-label and mounting-adapter photograph. A 200150 with another stud or approval suffix is not the same item.
      All FAQ
      MORE PARTS IN THE SAME PROJECT?

      Search another part number

      Use the exact manufacturer number where possible.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          SEE PRODUCTS IN SEARCH PAGE ()
          WHY BUYERS WORK WITH MOORE AUTOMATED

          Clear checks before you commit

          Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.

          • Pre-shipment inspection

            Products are inspected before dispatch to verify model, condition and applicable specifications.

          • Documentation available

            Product photos, packaging photos, certificates and datasheets can be provided when available.

          • Clear commercial terms

            Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.

          • 20+ years of experience

            Over 20 years of experience in industrial automation and hard-to-source legacy parts.

          • Product Lifecycle Stage

            Active / Available from OEM

            Moore Automated supplies high-quality Bently Nevada replacement modules and spare parts matched to 200150-09-CN. Exact-item verification and practical sourcing support help reduce equipment downtime.

          Related Products

          Browsing history

          Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
          Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

          Get a quick price for：

          200150-09-CN
          Quantity
          Upload
          (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
          Get a Quote
          For more information on how your data is processed and stored by Moore Automated please read our privacy policy.
          img0
          img0