Overview
Manuals
Integration Requirements
Commissioning Guidance
Model Selection
Features:
- 20015x accelerometer interface cables: 200151-40-03-00 belongs to the documented manufacturer product family.
- Configuration: 4.0 m length option 40, blue armored cable option 03, and standard coupling-nut option 00.
- Verification: Confirm all 40-03-00 suffixes, 4 m length, armor, connectors, and coupling nuts before replacement.
Bently Nevada 200151-40-03-00 is 4.0 m armored accelerometer interface cable designed for Bently Nevada 200150, 200155 and 200157 accelerometer installations. According to the official manufacturer documentation, it provides a screened two-connector signal path between the case-mounted accelerometer and monitoring interface. The ordering identity records 4.0 m length option 40, blue armored cable option 03, and standard coupling-nut option 00, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 200151-40-03-00 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the selected 20015x accelerometer, input module, allowable cable length, connector, and environment.
The Bently Nevada 200151-40-03-00 4.0 m armored accelerometer interface cable is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 200151-40-03-00 4.0 m armored accelerometer interface cable manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Integration Requirements
Confirm the selected 20015x accelerometer, input module, allowable cable length, connector, and environment. Compare the complete 200151-40-03-00 ordering code and nameplate data with the installed item before purchase.
Commissioning Guidance
Follow the manufacturer instructions and verify 63.5 mm minimum bend radius, connector sealing, armor routing, shielding, and strain relief. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Model Selection Notes
4.0 m length option 40, blue armored cable option 03, and standard coupling-nut option 00. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
