Overview
Manuals
Basic Info
Ordering Info
Application Details
Features:
- 200150, 200155 and 200157 Accelerometers
- Bently Nevada Machinery Condition Monitoring
- General Purpose Trendmaster 2000 or Trendmaster Pro Accelerometer
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 200151-60-03-00 Bently Nevada Accelerometers may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200151-60-03-00 Accelerometers Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 200151-60-03-00
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 200150, 200155 and 200157 Accelerometers
200151-Axx-Bxx-Cxx
Accelerometer Interface Standard Cable, Connectors on Both Ends
A: Cable Length
20: 2.0 meters
40: 4.0 meters
60: 6.0 meters
B: Armor Option
02: Blue cable without armor
03: Blue cable with armor
C: Coupling Nut
00: Standard coupling nut
02: Nylon coupling nut
10: Enhanced coupling nut. This option provides a better grip for
tightening the cable to the accelerometer and is provided
on both ends of the cable
1.Auxiliary Production Units (BOPs): Widely used in large industrial fans (forced ventilation, induced draft fans), cooling tower fans, centrifugal pumps, and heavy-duty electric motors.
2.Reciprocating and Screw Compressors: Used to monitor high-frequency impact noise and casing vibration to detect loose parts or detached rods early.
3.Gearboxes and Drive Systems: Used to transmit high-frequency vibration data generated by gear meshing and rolling bearing failures, helping to predict gear pitting or cage failure before catastrophic seizures occur.
4.Petrochemical and Oil & Gas Refineries: Used in critical delivery pumps, mixers, and gas distribution blowers.
5.The chemical corrosion resistance of the sheathing material protects internal piping from damage caused by process fluid splashes and oil mist.
6.Power Generation Facilities: Used in conventional coal/gas-fired power plants and hydroelectric power stations to monitor cooling water inlet pumps, exciter bearings, and ventilation equipment.
7.Heavy Manufacturing and Mining: Installed in large ore crushers, conveyor drive systems, and bulk material handling equipment, frequently exposed to dust, gravel, and physical impacts.
