Overview
Manuals
Matched Components
Maintenance Preparation
Suffix Interpretation
Features:
- 20015x accelerometer interface cables: 200151-20-03-00 belongs to the documented manufacturer product family.
- Configuration: 2.0 m length option 20, blue armored cable option 03, and standard coupling-nut option 00.
- Verification: Confirm all 20-03-00 suffixes, 2 m length, armor, connectors, and standard coupling nuts before replacement.
Bently Nevada 200151-20-03-00 is 2.0 m armored accelerometer interface cable designed for Bently Nevada 200150, 200155 and 200157 accelerometer installations. According to the official manufacturer documentation, it provides a screened connection with connectors at both ends between the accelerometer and monitoring interface. The ordering identity records 2.0 m length option 20, blue armored cable option 03, and standard coupling-nut option 00, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 200151-20-03-00 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the selected 20015x accelerometer, monitoring interface, cable-length limit, connector, and environmental routing.
The Bently Nevada 200151-20-03-00 2.0 m armored accelerometer interface cable is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 200151-20-03-00 2.0 m armored accelerometer interface cable manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Matched Components
Confirm the selected 20015x accelerometer, monitoring interface, cable-length limit, connector, and environmental routing. Compare the complete 200151-20-03-00 ordering code and nameplate data with the installed item before purchase.
Maintenance Preparation
Follow the manufacturer instructions and verify 63.5 mm minimum bend radius, connector sealing, armor routing, shield/drain handling, and strain relief. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Suffix Interpretation
2.0 m length option 20, blue armored cable option 03, and standard coupling-nut option 00. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
