Overview
Manuals
Basic Info
Ordering Information
Application Details
Features:
- 200350 Accelerometers Assembly
- Parameters are specified from +20 to +30 °C (+68 to +86 °F) and 100 Hz
- The 200350 accelerometers are general-purpose, housing-mounted seismic sensors designed for use with Trendmaster Pro software
The 200350 and 200355 accelerometers feature a sealed stainless steel housing. This design creates an extremely robust and durable sensor, ideal for harsh industrial environments. Each sensor is equipped with a 2-pin connector (MIL-C5015) on top for easy installation and removal of signal cables.
A 1/4-28 threaded hole on the bottom of the housing allows for various mounting options. The 200350 and 200355 accelerometers incorporate a piezoelectric sensing element that generates an electrical charge when subjected to vibration. This charge is then converted into a differential voltage signal by electrons, which is proportional to the acceleration parallel to the sensor's sensing axis.
The 200350-02-00-00-00 Bently Nevada 200350 Accelerometers may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200350-02-00-00-00 200350 Accelerometers Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 200350-02-00-00-00
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 200350 and 200355 Accelerometers
200350 Accelerometer
200350 – Axx - Bxx - Cxx
A: Mounting Stud
00: ¼-28 SS w/ Brass tip, 0.5”
01: ¼-28 to M6 x 1.00 Stainless Steel
02: ¼-28 to M8 x 1.25 Stainless Steel
09: No mounting stud
10: 1/4 -28 Adhesive Stud Mount
11: M6x1 Adhesive Stud Mount
12: M8x1.25 Adhesive Stud Mount
13: Magnetic Base Kit
B: Tolerance
00: 100 mV/g ± 20% (10.2 mV/m/s^2 ±20%)
C: Approvals
00: No Approvals
01: CSA, ATEX, IECEx
In practical industrial applications, this sensor is primarily used in conjunction with Bentley Nevada's Trendmaster Pro condition monitoring card or distributed data acquisition loop. Its stainless steel housing features a fully welded, sealed design with an IP68 protection rating, effectively resisting severe water and oil corrosion in industrial environments. The standard 2-pin MIL-C-5015 electrical connector on the top of the sensor converts the acquired mg/min acceleration signal into a proportional dynamic voltage output, providing high-density online health diagnostic support for critical equipment in the factory, such as high-density gearboxes, small and medium-sized pump sets, motors, and fans.
