Overview
Manuals
Housing Order Code
Probe Penetration
Conduit Checks
Features:
- The documented probe with connector is Probe not required; verify the connector interface, electrical length and matching probe-system components before commissioning.
- The documented probe cable length is Probe cable not required; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented standoff adapter (option c dimension) is No standoff adapter; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
21000-00-00-00-041-04-02 is a Bently Nevada Proximity Probe Housing Assemblies for external proximity-probe mounting. It provides probe mounting, adjustment and environmental protection. Key specifications: Probe with Connector: Probe not required; Probe Cable Length: Probe cable not required. Match the full order code and hardware before replacement.
The Bentley Nevada 21000-00-00-00-041-04-02 is an API 670 compliant aluminum explosion-proof eddy current probe housing with a 3/4-14 NPT connector. Its 4.1-inch sleeve immersion depth is designed for external adjustment and protection of displacement sensors within rotating machinery.
The exact 21000-00-00-00-041-04-02 execution must be confirmed by its complete order code, condition, connected proximity-probe measurement system and included scope before purchase or replacement.
Bently Nevada 21000-00-00-00-041-04-02 Proximity Probe Housing Assemblies manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Check the complete 21000-00-00-00-041-04-02 housing code against the documented material, probe penetration, thread, fittings and access arrangement. Retained facts: Probe with Connector: Probe not required; Probe Cable Length: Probe cable not required; Standoff Adapter (Option C Dimension): No standoff adapter.
Confirm the installed probe, standoff, conduit fittings, sealing and machine-case interface together. A matching outside shape alone does not establish interchangeability.
Verify probe travel and gap access, tighten fittings to the approved practice, confirm sealing and route the probe lead without damage before returning the machine to service.
