Overview
Manuals
General Information
Instruction info
Probe Pressure
Features:
- Proximity Probe Housing Assemblies
- 31000 and 32000 Proximity Probe Housing Assemblies
- The 31000/32000 Proximity Probe Housing Assembly is made of polyphenylene sulfide (PPS)
When proximity probes need to be mounted inside a machine housing, the 31000/32000 type proximity probe housing assembly is recommended. This assembly is typically used for radially mounted sensors, whether for vibration or key phase measurements. Using a proximity probe housing allows for easy external access to the proximity probe and its extension cables, enabling gap adjustment or probe replacement without disassembling the machine.
The 31000/32000 type proximity probe housing assembly is made of polyphenylene sulfide (PPS), an advanced high-strength thermoplastic material with excellent corrosion resistance. Other components of the housing assembly are made of corrosion-resistant stainless steel. Versions of this housing assembly pre-installed with the 3300 XL type proximity probe and various conduit fittings are available by order.
The 31000-26-05-00-040-01-02 Bently Nevada Proximity Probe Housing Assemblies may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 31000-26-05-00-040-01-02 Proximity Probe Housing Assemblies Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 31000-26-05-00-040-01-02
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 31000 and 32000 Proximity Probe Housing Assemblies
English Proximity Probe Housing Assemblies
31000 - Axx-Bxx-Cxx-Dxxx-Exx-Fxx
A: Probe with Connector
00: Probe not required
16: 3300 XL 8 mm probe
26: 3300 XL NSv probe
27: 3300 XL NSv probe, multiple approvals
28: 3300 XL 8 mm probe, multiple approvals
29: 3300 XL 8 mm probe, with connector protector
30: 3300 XL 8 mm probe, with connector protector, multiple approvals
31: 3300 XL NSv probe with connector protector
32: 3300 XL NSv probe with connector protector, multiple approvals
33: 3300 XL 11 mm probe
34: 3300 XL 11 mm probe, multiple approvals
35: 3300 XL 11 mm probe with connector protector
36: 3300 XL 11 mm probe with connector protector, multiple approvals
B: Probe Cable Length
00: Probe cable not required (Option A must also be 00)
05: 0.5 m (20 in)
10: 1.0 m (39 in)
C: Standoff Adapter Length (Option C Dimension)
15: Minimum length 1.5 in (38 mm)
75: Maximum length 7.5 in (191 mm)
Recommendation
Order in increments of 0.5 in (13 mm)
Examples
1.5 in (38 mm) = 15
No standoff adapter = 00
D: Probe Penetration Option (Option D Dimension)
10: Minimum length 1.0 in (25.4 mm)
Recommendation
Order in increments of 0.1 in (3 mm)
Examples
No probe sleeve = 000
3.7 in (94 mm) = 037
22.4 in (569 mm) = 224
E: Fittings
00: Without fittings
01: One 3/4-14 NPT fitting, two plugs.
02: Two 3/4-14 NPT fittings, one plug
03:
Two plugs, one 3/4-14 NPT fitting
One 3/4-14 to 1/2-14 NPT SST reducer
One cable seal grip with grommets for
the following cable sizes:
• 1/8 to 3/16 inches
• 1/4 to 5/16 inches
• 5/16 to 3/8 inches
06:
One 3/4-14 NPT fitting
One 3/4-14 NPT to 1/2-14 NPR SST
reducer
Two plugs
F: Mounting Thread
00: No outer sleeve, retainer, or retaining nut
02: 3/4-14 NPT (Required if ordering Standoff Adapter Option).
05: 7/8-14 UNF 2A
The 31000/32000 Proximity Probe Housing Assembly is designed to seal differential pressure between the probe tip and the housing main body when used with a 3300 XL 8 mm probe. The sealing material internal to the probe case consists of a Viton O-ring; the Oring between the sleeve and the housing is a Neoprene O-ring. The plastic housing is certified to seal against hose-directed water according to NEMA 4X and IP66 standards but is not designed to resist internal or external pressure.
