Overview
Manuals
Basic Info
Ordering Information
Configuration
Features:
- Proximity Probe Housing Assemblies
- 31000 and 32000 Proximity Probe Housing Assemblies
- The 31000/32000 Proximity Probe Housing Assembly is made of polyphenylene sulfide (PPS)
When proximity probes need to be mounted inside a machine housing, the 31000/32000 type proximity probe housing assembly is recommended. This assembly is typically used for radially mounted sensors, whether for vibration or key phase measurements. Using a proximity probe housing allows for easy external access to the proximity probe and its extension cables, enabling gap adjustment or probe replacement without disassembling the machine.
The 31000/32000 type proximity probe housing assembly is made of polyphenylene sulfide (PPS), an advanced high-strength thermoplastic material with excellent corrosion resistance. Other components of the housing assembly are made of corrosion-resistant stainless steel. Versions of this housing assembly pre-installed with the 3300 XL type proximity probe and various conduit fittings are available by order.
The 31000-28-05-40-040-02-02 Bently Nevada Proximity Probe Housing Assemblies may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 31000-28-05-40-040-02-02 Proximity Probe Housing Assemblies Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 31000-28-05-40-040-02-02
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 31000 and 32000 Proximity Probe Housing Assemblies
English Proximity Probe Housing Assemblies
31000 - Axx-Bxx-Cxx-Dxxx-Exx-Fxx
A: Probe with Connector
00: Probe not required
16: 3300 XL 8 mm probe
26: 3300 XL NSv probe
27: 3300 XL NSv probe, multiple approvals
28: 3300 XL 8 mm probe, multiple approvals
29: 3300 XL 8 mm probe, with connector protector
30: 3300 XL 8 mm probe, with connector protector, multiple approvals
31: 3300 XL NSv probe with connector protector
32: 3300 XL NSv probe with connector protector, multiple approvals
33: 3300 XL 11 mm probe
34: 3300 XL 11 mm probe, multiple approvals
35: 3300 XL 11 mm probe with connector protector
36: 3300 XL 11 mm probe with connector protector, multiple approvals
B: Probe Cable Length
00: Probe cable not required (Option A must also be 00)
05: 0.5 m (20 in)
10: 1.0 m (39 in)
C: Standoff Adapter Length (Option C Dimension)
15: Minimum length 1.5 in (38 mm)
75: Maximum length 7.5 in (191 mm)
Recommendation
Order in increments of 0.5 in (13 mm)
Examples
1.5 in (38 mm) = 15
No standoff adapter = 00
D: Probe Penetration Option (Option D Dimension)
10: Minimum length 1.0 in (25.4 mm)
Recommendation
Order in increments of 0.1 in (3 mm)
Examples
No probe sleeve = 000
3.7 in (94 mm) = 037
22.4 in (569 mm) = 224
E: Fittings
00: Without fittings
01: One 3/4-14 NPT fitting, two plugs.
02: Two 3/4-14 NPT fittings, one plug
03:
Two plugs, one 3/4-14 NPT fitting
One 3/4-14 to 1/2-14 NPT SST reducer
One cable seal grip with grommets for
the following cable sizes:
• 1/8 to 3/16 inches
• 1/4 to 5/16 inches
• 5/16 to 3/8 inches
06:
One 3/4-14 NPT fitting
One 3/4-14 NPT to 1/2-14 NPR SST
reducer
Two plugs
F: Mounting Thread
00: No outer sleeve, retainer, or retaining nut
02: 3/4-14 NPT (Required if ordering Standoff Adapter Option).
05: 7/8-14 UNF 2A
Key technical and engineering features of this configuration include comprehensive corrosion protection: thanks to its non-metallic housing, it perfectly withstands the corrosion challenges posed by high salt spray on coastal or offshore oil and gas platforms, achieving a 4X/NEMA 4X/IP66 protection rating. Its physical seal completely blocks the intrusion of heavy rain, powerful water jets, and industrial chemical mists, thus protecting the internal probe connectors.
Extended Housing Opening Length (4.0-inch Extension + 4.0-inch Penetration Depth): This option includes a 4.0-inch external extension (Option 40) designed to bypass thick insulation layers, external accessories, or machine surface hardening layers. It pushes the PPS junction box outwards while the internal 304 stainless steel sleeve penetrates 4.0 inches into the housing (Option 040), precisely passing through the bearing housing cover and internal flow channels until it approaches the rotor journal surface.
Electrical Cabling Convenience with Dual 3/4 NPT Interfaces: Option E = 02 is a classic two-port cabling solution in the 31000 series. It provides two 3/4-14 NPT output ports, allowing field engineers to connect sensor junction boxes in series for use with multiple machines, or to lay a separate cable with one input and one output, and separate signal and power lines.
