Overview
Manuals
Basic Info
Ordering Information
System Integration Warning
Features:
- 3300 5mm Proximity Probes
- 3300 5 mm Transducer System
- 330172 3300 5mm Probe, 1/4-28 UNF thread, with armor
When used with the 3300 XL proximity sensor and XL extension cable, this system provides an output voltage proportional to the distance between the probe tip and the conductive surface being measured. The system can measure both static (position) and dynamic (vibration) data.
Its primary applications include vibration and position measurement in hydrodynamic bearing machinery, as well as adhesion phasor and velocity measurement. The system provides accurate and stable signal output over a wide temperature range.
The 330172-00-20-90-01-05 Bently Nevada 3300 5mm Proximity Probes may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330172-00-20-90-01-05 3300 5mm Proximity Probes Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: 330172-00-20-90-01-05
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: 3300 5 mm Transducer System
3300 5mm Proximity Probes
3300 5mm Probe, 1/4-28 UNF thread, with armor
330172 -Axx-Bxx-Cxx-Dxx-Exx
A: Unthreaded Length
Length configurations:
Maximum unthreaded length: 8 8 = 8.8 in.
Minimum unthreaded length: 0 0 = 0.0 in.
Example: 0 4 = 0.4 in.
B: Overall Case Length
Order in increments of 0.1 in.
Threaded Length configurations:
Maximum unthreaded length: 9 6 = 9.6 in.
Minimum unthreaded length: 0 8 = 0.8 in.
Example:2 4 = 2.4 in.
C: Total Length
0 5: 0.5 meter (1.6 feet)
1 0: 1.0 metre (3.3 feet)
2 0: 2.0 metres (6.6 feet)
5 0: 5.0 metres (16.4 feet)1
9 0: 9.0 metres (29.5 feet)
D: Connector
0 1: Miniature coaxial ClickLoc connector with connector protector, standard cable
0 2: Miniature coaxial ClickLoc connector, standard cable
1 1: Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
1 2: Miniature coaxial ClickLoc connector, FluidLoc cable
E: Agency Approval
0 0: Agency Approval Option
0 5: Multiple Approvals
Because this probe has a built-in 9.0-meter lead, it must be connected directly to your Proximitor sensor. Connecting any intermediate extension cable to the 9-meter probe will cause the loop's tuning capacitor to oversaturate. This can result in severe signal distortion, calibration scale factor drift, or a fault signal (displayed as a straight line) on the monitoring rack.
