Overview
Manuals
Temperature Option
ETR System Match
Hot-Service Setup
Features:
- The documented value for unthreaded length is 50 mm; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented value for overall case length is 130 mm; retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented value for total length is 5.0 meters (16.4 feet); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330194-05-13-50-05 is a Bently Nevada 3300 XL 8 mm ETR Proximity Probes for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Unthreaded Length: 50 mm; Overall Case Length: 130 mm. Match the full order code and hardware before replacement.
Bently Nevada's 330194-05-13-50-05 is an API 670 compliant 3300 XL 8mm metric stainless steel armored eddy current displacement probe (armored proximity probe) designed for harsh industrial environments. Its specifications and coding rules indicate that the probe features a robust protective armor consisting of stainless steel and an FEP sheath, resisting external mechanical damage and oil contamination. Key selection parameters are as follows: 05 represents a 50mm metric unthreaded length, 13 represents a 130mm M10×1 metric threaded housing length, 50 represents a 5.0-meter (approximately 16.4-foot) system cable length (designed for use with a 5-meter system preamplifier), and 05 has received certifications from multiple international hazardous area explosion protection and safety organizations, including CSA, ATEX, and IECEx.
The exact 330194-05-13-50-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330194-05-13-50-05 3300 XL 8 mm ETR Proximity Probes manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330194-05-13-50-05. Retained facts: Unthreaded Length: 50 mm; Overall Case Length: 130 mm; Total Length: 5.0 meters (16.4 feet). Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
