Overview
Manuals
Principle
Features:
- Module of GE Fanuc series 90-30 PLC systems
- Series 90-30 Master module
- Deterministic cyclic data exchange with comprehensive diagnostic monitoring support
The IC693PBM200 is a 90-30 series communication module, originally manufactured by GE Fanuc (now acquired by Emerson Automation). This module is a PROFIBUS DP master module, capable of communicating with up to 125 DP slaves, each supporting 244 bytes of input and 244 bytes of data transmission. It features one RS232 service port and one RS485 PROFIBUS master port.
The IC693BPM200 is a PROFIBUS master module belonging to the 90-30 series controller platform, also originally manufactured by GE Fanuc (now acquired by Emerson Automation). This module is an optional communication module supporting the PROFIBUS communication protocol. It features one PROFIBUS master port for daisy-chain topology communication with PROFIBUS networks, and one RS232 service port for configuration downloads and firmware upgrades.
The IC693PBM200 GENERAL ELECTRIC Series 90-30 Master module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
GENERAL ELECTRIC IC693PBM200 Series 90-30 Master module datasheet(manual), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The IC693BPM200 is a single-slot module that can be mounted on a CPU backplane, expansion backplane, or remote backplane. It supports communication with up to 125 Profibus DP slaves, enabling a remote I/O architecture and communication with other devices such as gateways, HMIs, and SCADA systems. For remote I/O functionality, each Profibus slave can receive 244 bytes of input data and send 244 bytes of output data.
