Overview
Manuals
Principle
Features:
- PACSystems RX3i acommunication module
- Profibus DP Master module that is used to enable communication with up to 125 DP Slaves
- It supports data transfer size of 244 Bytes of input
The IC695BPM300 is a Profibus master module, originally manufactured by GE Intelligent Platforms (GE IP), now part of Emerson Automation's PACSystems RX3i Programmable Automation Controller (PAC) family. This module is used for data exchange over a Profibus network, supporting a maximum of 3,584 bytes of input and 3,584 bytes of output data.
This Profibus master module supports communication with up to 125 DP slaves, each capable of sending 244 bytes of input data and receiving 244 bytes of output data. The IC695BPM300 supports all standard data rates, including 9.6 kbit/s, 19.2 kbit/s, 93.75 kbit/s, 187.5 kbit/s, 500 kbit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
The IC695PBM300 GENERAL ELECTRIC PACSystems RX3i Communication Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
GENERAL ELECTRIC IC695PBM300 PACSystems RX3i Communication Module datasheet(manual), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
It can provide status information such as a slave device status bit array table, network diagnostic counters, DP master device diagnostic counters, firmware module version, and slave device diagnostic addresses. It is mounted on the RX3i backplane and supports PCI connectivity.
