Overview
Manuals
DP Addressing
Station Layout
Bus Startup
Features:
- Exact Siemens order number 6ES7153-1AA03-0XB0.
- PROFIBUS DP Interface Module for the documented S7-300 system.
- Replacement requires saved wiring and hardware configuration.
6ES7153-1AA03-0XB0 is a SIMATIC ET 200M IM 153-1 interface module that connects an ET 200M station to PROFIBUS DP. It supports a station with up to eight S7-300 I/O modules. The replacement must retain the PROFIBUS address, bus connector termination, module order and station configuration. Before replacement, record the complete label, installed slot, wiring, accessories and retained hardware configuration; after installation, verify diagnostics and every affected channel or controller function.
Before removal, create the required backup and label all connections. After installation, restore only the approved configuration and complete the documented electrical, communication and functional checks.
The Siemens 6ES7153-1AA03-0XB0 IM 153-1 Interface Module is listed as Obsolete / Discontinued by OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
Siemens 6ES7153-1AA03-0XB0 Official Product Manual, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
It supports a station with up to eight S7-300 I/O modules. The replacement must retain the PROFIBUS address, bus connector termination, module order and station configuration.
Use only the ratings and settings documented for the complete 6ES7153-1AA03-0XB0 order number. Record the installed values before replacement and compare every configured channel or interface after commissioning.
6ES7153-1AA03-0XB0 belongs to the Siemens S7-300 platform. Match the rack or station, front connector, adjacent modules, bus architecture and saved hardware configuration; a visually similar Siemens part is not automatically interchangeable.
Before removal, isolate energy, save the project or channel parameters and identify every conductor and connector. After installation, check supply, diagnostics, communication and all affected functions under a controlled commissioning procedure.
