Overview
Manuals
Signal Transmission & Mounting
Features:
- Industrial vibration monitoring;Differential output
- CENELEC approved
- Internal case insulation
The CA 201 accelerometer is equipped with a symmetrical shear mode polycrystalline measuring element, which has internal case insulation. The transducer is designed for heavy-duty industrial monitoring and measurement of vibration.
The accelerometer is fitted with an integral cable protected by a stainless steel flexible tube welded to the case. The CA 201 accelerometer is available in CENELEC approved versions and has a high sensitivity
The S3960 AC46286 144-201-000-222 Vibro-Meter Piezoelectric Accelerometer may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter S3960 AC46286 144-201-000-222 Piezoelectric Accelerometer manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Because this sensor generates a raw, high-impedance piezoelectric charge loop rather than a DC voltage, an external signal conditioner is required—typically used in conjunction with a Vibro-meter® IPC 704 or IPC 707 charge amplifier. This conditioner converts the pC/g loop into a standard proportional voltage or current signal before sending it back to the VM600 housing. During installation, the sensor is secured to the machine surface with four M6×35 hex screws, with torque precisely controlled at 15 Nm. Due to the fully internally insulated sensor base, no external insulating pads are required.
